Espedeo VM-1140 VESA Ceiling Mount

The Espedeo VM-1140 is a VESA ceiling mount designed for in-auditorium or in-home installation of Espedeo Supra-5000 laser cinema projector with VESA mounting holes of 400 x 400, making it an ideal solution for boothless mini-theatres, small auditoriums and private cinema installations.

Get a Quote

A compatible ceiling mount, VCTUB XL Universal Projector mount, can also be sourced from Legrand.

Overview

The Espedeo VM-1140 is a VESA ceiling mount designed for in-auditorium or in-home installation of Espedeo Supra-5000 laser cinema projector with VESA mounting holes of 400 x 400, making it an ideal solution for boothless mini-theatres, small auditoriums and private cinema installations.

  1. Adjustable angles
  2. Adjustable tube length with cable management feature
  3. Top panel designed for both truss ceiling mount and concrete ceiling mount

The height, rotation and tilt of the ceiling mount are adjustable to fit various installation environments. The height can be adjusted from 240 millimeters (9.45 inches) to 1140 millimeters (44.88 inches). The rotation angle adjustment range is +/- 20 degrees. Thanks to its tool-less design,a single installer may adjust tilt angle with clamping handles effortlessly.The tilt angle adjustment range along the vertical axis is +/- 25 degrees and the horizontal axis is +/-15 degrees.

Additionally, the Espedeo VM-1140 is designed with a cable management feature, conceals and organizes the cables connected to the projector, creating a visually pleasing work environment for your mini-theatre or private cinema.

The Espedeo VM-1140 is robust and capable of carrying a projector with a weight of up to 150 kg / 330 lbs. It can either be used to install the projector from the ceiling or fasten it to a truss using truss mounting clamps. With both mounting methods, additional safety is provided by securing the equipment with the included safety cable to prevent the equipment from falling during or after setup when used in accordance with safety instructions.

Specifications

Steel Grade +
Steel Grade

ASTM A283 Grade C

Mounting holes +
Mounting holes

VESA 400 x 400

Ceiling mounting plate +
Ceiling mounting plate

400 x 400 mm / 15.75” x 15.75”

Adjustable height +
Adjustable height

240 - 1140 mm / 9.45” - 44.88”

Vertical angle +
Vertical angle

+/- 25°

Horizontal angle +
Horizontal angle

+/- 15°

Rotation angle +
Rotation angle

+/- 20°

Load limit +
Load limit

150 kg / 330 lbs

Load-bearing capacity of the ceiling slab +
Load-bearing capacity of the ceiling slab

Minimum 250 kg/m² / 51.20 lb/ft²

Design factor +
Design factor

7:1 ratio

Color options +
Color options

Black or white

Ceiling slab fasteners (supplied with VM-1140) +
Ceiling slab fasteners (supplied with VM-1140)

Anchor Bolt 10 x 60

Truss mounting clamps (optional) +
Truss mounting clamps (optional)

4 x standard truss clamps of 50mm diameter, each with a load limit of 25 kg

Dimensions +
Dimensions

690 x 450 x 450 mm / 27.17” x 17.72” x 17.72”

Shipping dimensions +
Shipping dimensions

620 x 470 x 170 mm / 24.41” x 18.50” x 6.69”

Net weight +
Net weight

24 kg / 52.91 lbs

Shipping weight +
Shipping weight

25 kg / 55.11 lbs

Safety instructions +
Safety
Instructions
  1. An experienced professional installer is required to install the mount to a ceiling or truss and the projector. The provided safety and assembly instructions must be strictly followed. Please refer to the VM-1140 Assembly Guide for instructions. An improperly installed mount may result in property damage, serious personal injury and/or liability for installing contractor. Product must be used as intended pursuant to the safety and assembly instructions. Use of the product by a user is at the user's risk.
     
  2. Always use safety cables! This will prevent equipment from falling during/after setup and while in use.
     
  3. Always check if the ceiling or truss is structurally strong enough to support the load. An experienced professional is required to determine if the ceiling or truss structure is strong enough to hold the weight of both the projector and VM-1140 including its brackets.Please refer to the specifications for details.
     
  4. Only use fasteners and clamps.
     
  5. Always make sure to securely use and tighten/lock all mounting bolts provided. Loose bolts may become unscrewed over time due to vibration which could potentially create a safety hazard when not tightened securely. User should inspect the bolts on a regular basis to ensure all bolts are secure.

Download

Terms

Support

For technical downloads such as drivers, firmware, manuals, drawings and documentation we would kindly like to direct you to our page.

My cart 0
You have successfully subscribed!